Design & Reuse
arrow A/D Converter (ADC) (521)
arrow Amplifier (102)
arrow Analog Comparator (16)
arrow Analog Filter (27)
arrow Analog Front Ends (38)
arrow Analog Multiplexer (3)
arrow Analog Subsystems (3)
arrow Clock Synthesizer (83)
arrow Coder/Decoder (CODEC) (107)
arrow D/A Converter (DAC) (217)
arrow DC-DC Converter (67)
arrow DLL (743)
arrow Graphics & Video Modules (5)
arrow Oscillator (337)
arrow Oversampling Modulator (8)
arrow PLL (1723)
arrow Power Management (835)
arrow RF Modules (81)
arrow Sensor (32)
arrow Sensors and Monitors (52)
arrow Switched Cap Filter (1)
arrow Temperature Sensor (133)
arrow Other (497)
835 IP
151
2.2581
2 separated LDO blocks IP ISTS_LDO2CH_S40V33
The ISTS_LDO2CH_S40V33 IP includes 2 separated LDO blocks to generate the power for PLL and 2.5V analog power application....
152
2.2581
150mA Capaless LDO for MCU Application
150mA Capaless LDO for MCU Application...
153
2.2581
Very low power IP with BOR/POR features embedded
The IST-POR02 IP is a very low power IP with BOR/POR features embedded. It detects the voltage level of core power DVDD and IO power AVDD. When AVDD r...
154
2.2581
Very low power IP with VDT/POR features embedded
The IST-POR05 IP is a very low power IP with VDT/POR features embedded. It detects the voltage level of IO power AVDD and core power. When AVDD rises ...
155
2.2581
Always on LDO IP IST-LDO33T15
The IST-LDO33T15 IP is a always on LDO to generate the power for Fuse, PLL, etc. application....
156
2.2581
Always on Ultra Low Power LDO
The IST-ULPLDO33T15 IP is a always on Ultra Low Power LDO to generate the power for Fuse, PLL, etc. application....
157
2.0
1.16 V Bandgap voltage reference
180TSMC_BVR_01 a bandgap voltage reference produces temperature independent voltage level around 1.16V (at Bangap_Vref pin) using temperature dependen...
158
2.0
1.19 V Reference voltage source
Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...
159
2.0
0.4V/250nA Bandgap voltage and current sources
055GF_BVR_01 the bandgap voltage reference generates temperature-compensated voltage due to mutual compensation of temperature dependence of bipolar d...
160
2.0
0.6V/10uA, 20uA Bandgap and V2I converter (Voltage to current)
55TSMC_BGV_02 is a reference voltage and current source that consists of bandgap voltage reference, voltage-to-current converter and current-voltage b...
161
2.0
30mA 2-channel LDO voltage regulator (output voltage each channel 1.0V)
028SAM_LDO_04 is external-capacitor-based Linear Regulator in Samsung 28 FD-SOI to generate SoC voltage supply voltage. It contains two independently ...
162
2.0
50mA capacitor-less LDO voltage regulator (output voltage 0.5V to 0.8V)
The 022GF_LDO_01 is capacitor-less Linear Regulator designed in GlobalFoundries 22FDX to generate internal supply voltage for core logic domain, SRA...
163
2.0
Bandgap Voltage / Current Reference
The agileBandGapGP consists of a bandgap reference core together with a bandgap reference voltage generator (VREF), VREF replica current generators an...
164
2.0
Cap-less 100mA Low Noise LDO, XFAB 250nm
The LDO is capable of outputting 1.2V voltage with maximum power of 100mA and low drop out voltage of less than 200mV. The IP is fabricated in XFAB 25...
165
2.0
Cap-less 25mA Low Noise LDO, Fujitsu 90nm
The AR25F01 is a mass-production proven cap-less LDO IP. It is capable of outputting 1.2V voltage with maximum power of 20mA and low drop out voltage ...
166
2.0
Active antenna detector with load current limit
The antenna detector supplies an active antenna and is able to detect both open and short circuits. A current limiter restricts the antenna current to...
167
2.0
Active antenna detector with load current limit and supply current 140 uA
The antenna detector supplies an active antenna and is able to detect both open and short circuits. A current limiter restricts the antenna current to...
168
2.0
LDO voltage regulator
The voltage regulator consists of a differential amplifier which compares reference voltage with voltage from a feedback divider. It adjusts the imped...
169
2.0
LDO voltage regulator (output voltage 1.8 V)
The voltage regulator consists of a differential amplifier which compares reference voltage with voltage from a feedback divider. It adjusts the imped...
170
2.0
GF 22FDX combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eSR) and an ultra low q...
171
2.0
High efficiency and Low BoM DC-DC designed in GobalFoundries 22FDX
High efficiency DC-DC converter designed in GF 22FDX with full PWM operation mode. Can be configured with output current from 100 mA to 2A...
172
2.0
High performance 1.8V reference current and voltage generator
The ODT-REF-16FFCT-SV1P8 is a high-performance reference current and voltage generator. The block incorporates a proprietary architecture to achieve h...
173
2.0
Linear LDO Low-Dropout Voltage Regulator
The agileLDO is a linear low-dropout voltage regulator (LDO) providing precision and programmable voltage regulation across a wide range of input and ...
174
2.0
Single Inductor Multiple Output (SIMO) DC/DC Buck Converter
4-output Single Inductor Multiple Output (SIMO) DC/DC buck converter....
175
2.0
voltage buffer in SMIC 65nm
The present IP is a voltage reference buffer, which is developed with SMIC 65nm ETOX Nor Flash process. And It generates a reference voltage with load...
176
2.0
Combo voltage regulator in TSMC 40nm LP eFlash combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eSR) and an ultra low q...
177
2.0
Low-quiescent DC/DC buck converter
Supply active and always-on domains from a single converter....
178
2.0
Power Detector 22GHz to 44GHz
The WEA2244PD45G is a microwave signal envelope detector. It is capable of detecting signals in the range of -1 dBm to 20 dBm with an accuracy of +/-0...
179
2.0
Power-On-Reset POR Power on reset
The agilePOR GP is a power-on-reset circuit. Based on a traditional architecture, it allows for programmable thresholds for normal and low power modes...
180
2.0
IR DROP
The agileIRDROP I-R Drop Sensor is a circuit to detect supply I-R drops within the system. It is useful to detect loss of power or attacks to the powe...
181
2.0
TSMC 40nm ULP combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eSR) and an ultra low q...
182
2.0
TSMC 40nm ULP eFlash combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eSR) and an ultra low q...
183
1.0
3 to 5 GHz power amplifier
130iHP_PA_02 is E class power amplifier (PA). Voltage regulator is used due to transistor low breakdown voltage and PA inductive load. Such solution a...
184
1.0
2-channel capacitor-free LDO total solution
...
185
1.0
5.0V/3.3V-->3.3V/1.5V capacitor-free regulator
Supports capacitor-less application with fast transient; Typical output 1.50V, output range is from 1.40V to 1.65V; 200mA driving ability...
186
1.0
1.2V to 0.75V Linear Voltage Regulator
The LDO provides 0.75V regulated output voltages. It consists of a BGR, regulator cores and LVD. It can deliver up to 900mA. The operational junction ...
187
1.0
1.2V to 0.85V Linear Voltage Regulator
The low-dropout regulator provides 0.85V regulated output voltage. It consist of a regulator core and a buffer. It can deliver up to 200mA. The operat...
188
1.0
3.3V to 1.8V Linear Voltage Regulator
The linear voltage regulator provides 1.8V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 350mA...
189
1.0
3.3V-->1.5V capacitor-free LDO
...
190
1.0
3.3V-->1.5V ultra-low power LDO
...
191
1.0
1.8V to 0.75V Linear Voltage Regulator
The linear voltage regulator provides 0.75V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 80mA...
192
1.0
0.8V to 0.75V Low-Dropout Voltage Regulator
The digital low-dropout regulator provides 0.75V regulated output voltage. It consist of a global controller and 16 local LDOs. It can deliver up to 6...
193
1.0
1.8V to 0.8V Linear Voltage Regulator
The linear voltage regulator provides 0.8V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 100mA...
194
1.0
1.8V to 1.0V Linear Voltage Regulator
The linear voltage regulator provides 1.0V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 50mA....
195
1.0
1.8V to 1.2V Linear Voltage Regulator
The linear voltage regulator provides 1.2V regulated output voltage. It consists of a regulator core and a reference generator. It can deliver up to 1...
196
1.0
30 mA flash LDO voltage regulator (output voltage 1.8 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider. Differential amplifier compares reference voltage ...
197
1.0
30 mA LDO voltage regulator (output voltage 0.9 to 1.3 V)
055GF_LDOVR_03 the voltage regulator is used to maintain a stable output voltage at varying input voltage. The block consists of a differential amplif...
198
1.0
30 mA linear voltage regulator
The voltage regulator is CMOS low dropout linear voltage regulator with 30 mA output current capability. The device have high output voltage accuracy,...
199
1.0
50mA CMOS buck regulator
The OT1150t180_50mA is a 50mA CMOS buck regulator designed for use in a wide variety of mixed signal device applications. Input range is 3V-5.5V and o...
200
1.0
12 Bit High Resolution JTM / ADC
SGC24012_01_TSMC_CLN16FC is an accurate high resolution ADC for temperature or voltage measurements. Due to its high accuracy, it presents a wide rang...